1. Working principle of wet dust collector

The wet dust collector is a combination of water bath and shower. First, the attraction of the centrifugal fan is used to press the dust-containing gas into a water tank with a certain height of water, and the water bath will absorb a part of the dust in the water. After uniform distribution, the gas flows from bottom to top, and the high-pressure nozzle sprays from top to bottom to trap the remaining dust particles. Its filtration efficiency can reach more than 85%. The wet dust collector can effectively remove liquid or solid particles with a diameter of 0.1-20 microns from the airflow, while removing some gaseous pollutants.

Second, the structure diagram of the wet dust collector

Three, the characteristics of wet dust collector

Capture large particles of dust with a particle size of 0.1-20 microns, and the dust removal efficiency can reach more than 85%

Simple structure, convenient operation and maintenance

The equipment can handle sticky, wet dust

The equipment supports high-temperature and high-humidity airflow, minimizing the possibility of fire and explosion

Recycle water without discharge to the outside and no secondary pollution

Fourth, the equipment parameters of the wet dust collector

No. Item Parameters
1 Processing air volume 1000m3/h ~200000m3/h
2 Equipped with power 1.1Kw ~220Kw
3 Equipment pressure loss 600Pa ~ 1000Pa
4 Design wind speed 1-3m/min
5 Dust removal efficiency above 80%
6 Shell material Q235 or stainless steel or PP
7 Equipped with power supply 380V, 50Hz, three-phase five-wire
Five, the scope of application of wet dust collector

Wet dust collectors are widely used in food, pharmaceuticals, feed, hardware, shoe materials, smelting, plastics, rubber, paper, cement, ceramics, machinery, chemicals, electricity, clothing, electronics, leather, tobacco, coal mining and other industries.